Apollon Collector
The Apollon collector with one piece external seamless trough and copper water frame is the ideal choice that combines reliability with efficiency. The selective absorber - made of selective aluminium sheet with a special titan coating formed in vacuum - achieves high levels of absorbency 95% (±2%) and at the same time low radiation 5% (±2%) making Apollon collector a prime choice.
Apollon collector used in:
- Solar water heaters Apollon
- Solar water heaters Hyperion
- Forced circulation systems
TYPE | m² | AL | AL S.I. | CU |
Αpollon 1500 | 1.5 | Yes | Yes | Yes |
Apollon 2000 | 2.0 | Yes | Yes | Yes |
Apollon 2600 | 2.6 | Yes | Yes | Yes |
Apollon AL S.I.: Enhanced with 20mm lateral insulation of glasswool
Apollon CU: Copper absorber with extra 20mm lateral insulation of glasswool
Collector Apollon
External one piece trough of naval aluminium alloy, rich in magnesium for protection against corrosion. |
High density eco-friendly thermal insulation achieved with a 60mm thick layer of prepressed rockwool with a covering of black glass fabric for the minimization of thermal losses. Rockwool insulation thermal conductivity: λ=0,035 W/(m°C). |
Headers are punched with upper expansion for perfect manifolds fitting, thus avoiding pressure drop in the collectors. |
Available in a variety of colors to chose from including metallic, grey, tile and black. |
Low iron tempered solar glass, with a stable coefficient of expansion and high light transmittance; can withstand adverse weather conditions (e.g. hail storm, extreme temperature changes, etc.). |
Special plastic parts for supporting and sealing the water frame to the trough, specially designed for the collector's ventilation, ith temperature sensor supporting option. Special silicone rubber seals allow fluctuation of the absorber's length (contraction - expansion) at all temperature (from -40 °C and up to +200 °C). |
Four internal M8 threads integrated in the trough for simple and safe collector mounting on the support base. |
Support base
Support base for installation on both flat and inclined surface, specially designed for simple mounting and inertia optimization. |
Designed with the most modern calculation methods, according to which it is subject to natural and electronic inertia tests in extraordinary weather conditions. |
COLLECTOR Apollon 1500 | |
TOTAL AREA (m²) | 1.52 |
NUMBER OF MANIFOLDS | 10 |
HEAT TRANSFER MEDIUM | PROPYLENE GLYCOL SOLUTION |
CAPACITY (lt) | 1.45 |
ABSORBER SURFACE (m²) | 1.3 |
TOTAL DIMENSIONS LxWxH (mm) | 1510x1010x110 |
COLLECTOR TOTAL WEIGHT (without liquid) (kg) | 28 |
ABSORBER | SELECTIVE ALUMINIUM |
ABSORBENCY / RADIATION COEFFICIENT | 95% ±2% / 5% ±2% |
COLLECTOR Apollon 2000 | |
TOTAL AREA (m²) | 2.03 |
NUMBER OF MANIFOLDS | 10 |
HEAT TRANSFER MEDIUM | PROPYLENE GLYCOL SOLUTION |
CAPACITY (lt) | 1.75 |
ABSORBER SURFACE (m²) | 1.8 |
TOTAL DIMENSIONS LxWxH (mm) | 2010x1010x110 |
COLLECTOR TOTAL WEIGHT (without liquid) (kg) | 38 |
ABSORBER | SELECTIVE ALUMINIUM |
ABSORBENCY / RADIATION COEFFICIENT | 95% ±2% / 5% ±2% |
COLLECTOR Apollon 2600 | |
TOTAL AREA (m²) | 2.53 |
NUMBER OF MANIFOLDS | 13 |
HEAT TRANSFER MEDIUM | PROPYLENE GLYCOL SOLUTION |
CAPACITY (lt) | 2.12 |
ABSORBER SURFACE (m²) | 2.3 |
TOTAL DIMENSIONS LxWxH (mm) | 2010x1260x110 |
COLLECTOR TOTAL WEIGHT (without liquid) (kg) | 45.4 |
ABSORBER | SELECTIVE ALUMINIUM |
ABSORBENCY / RADIATION COEFFICIENT | 95% ±2% / 5% ±2% |
|
||||||||||||||||||||||||||||||||||||
Copyright © 2022 Economy Solar Solutions. All rights reserved.
Created by developNET